AIC 95kPa Compliant Transport Bags 95kPa biohazard specimen
The ai650® 95kPa Biohazard Specimen Transportation Bag are
qualified to withstand the requirement of ICAO Packaging
Instruction 650 and the CFR 49, Parts 100 to 195 and thus ensure
the safety during the Transportation of Dangerous Goods or
Biohazard Materials by Air.the bags can be produced in our brand
name or ai650 ® or in OEM brands or customized labels of customers.
2. General Description
The bags were developed for carriage of dangerous or biohazard
substances in conditions of the inside/outside pressure
differential of not less than 95kPa.Each of the bag have a
absorbent pocket sleeve inside which is capable of holding 7
cryogenic vials and with a absorbency of minimum 200ml of distilled
3. Available sizes
|Size (I.D.: mm)||Size (I.D.: inch)||Qty per carton|
|Small||150mm x 240mm||6" x 9.5"||400 bags|
|Medium||250mm x 300mm||9.75" x 11.75"||200 bags|
|Large||300mm x 400mm||11.75" x 15.75"||200 bags|
|X-Large||350mm x 450mm||13.75" x 17.75"||100 bags|
1. Our 95 kPa bags satisfy supplementary packaging requirements in
the IATA DG Regulations (22.214.171.124.4). These bags are designed to be
used with inner packaging containing liquids that, in themselves,
do no comply with 95 kPa pressure requirements. When a 95 kPa bag
is used in conjunction with each inner packaging containing liquid,
the assembled UN package is eligible to be transported by air (IATA
DGR packaging instructions must also be followed to ensure
compliance). Our pressure bags also double as a barrier between
intermediate packaging (ie. vermiculite or other absorbent) and
inner containers in 4GV UN Boxes. Browse our various sizes belo
When you need a shipping option that can withstand temperature and
pressure changes without leaking, then our 95kPa Pressure Bags may
be the best option. This bag is designed to withstand, without
leakage, an internal pressure which produces a pressure
differential of not less than 95kPa. The patented VonSeal® liquid
tight bag has passed the tests as outlined in 173.196(f) of the
DOT’s Title 49 CFR and as outlined in Packing Instructions 602 and
650 of the 2001-02 ICAO Technical Instructions for the Safe
Transport of Dangerous Goods by Air.
2. Take the guesswork out of packaging, protecting and shipping
four inner containers of your hazmat materials in one box with AI
650’s 4GV Packaging Kits. These UN-certified, Variation Two
shippers are suitable for shipping hazardous liquids or solids in
Packing Groups I, II and III by any mode of transportation. They
can accommodate your own glass or plastic bottles which must pass
hydrostatic pressure tests to meet ISTA Procedure 1A when shipping
by air. These kits include everything you need to protect your
containers’ internal contents, such as absorbent pouches,
fiberboard insert, fiberboard pads, ties, pressure-sensitive tape
and a 4GV corrugated outer box. Available in two sizes, you can
ship either four 8-oz. or four 1L containers. Save yourself time
and avoid packaging errors and compliance issues when shipping four
inner containers of hazardous materials by using one of these
all-inclusive 4GV packaging kits.
3. It is suitable for transport packaging of pipes, bottles,
containers or some samples with potential infectious sources to the
laboratory. This series of products received 95KPa pressure and
leakage test in the temperature range of -40 ° C to +50 ° C;
4. Specimen transport bags are liquid tight and tamper evident. The
patented adhesive closure and continuous seal meet or exceed
standards of all major air carriers and DOT. Polyethylene
construction and adhesive closure provides added security during
handling by personnel.
5. How to Close The Shipping Bag Properly
Specimen shipping bags in this carton are designed to perform at
high internal pressure, should an airliner lose its cabin pressure.
So, in order for the bag to be effective and perform to its design
capabilities, the bag must be closed properly after insertion of
Q1. What is your terms of packing?
A: Generally, we pack our goods in cartons. If you have legally
registered patent, we can pack the goods in your branded boxes
after getting your authorization letters.
Q2. Can i ask one pair samples before place order?
A:Yes we can produce by your samples,we can send you samples for
free,but customer need to pay courier cost by themselves.
Q3.How do you take care when your clients received defective
A: replacement. If there are some defective items, we usually credit
to our customer or replace in next shipment.
Q4.How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check
the goods when they go into next step production procedure.
Q5. How can I place order?
A: You can contact us by email about your order details, or place
order on line.
Q6.How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and
Paypal, Western Union are the most usual ways we are using.
Q7.What’s the order procedure?
A: First we discuss order details, production details by email or TM.
Then we issue you an PI for your confirmation. You will be
requested to do pr -epaid full payment or deposit before we go into
production. After we get the deposit, we start to process the
order. We usually need 7-15days if we don’t have the items in
stock. Before production has been finished, we will contact you for
shipment details, and the balance payment. After payment has been
settled, we start to prepare the shipment for you.
Q8. How about your delivery time?
A: Generally, it will take 5 weeks after receiving your advance
payment. The specific delivery time depends on the items and the
quantity of your order.
Q9. How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our
customers benefit ;
2. We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come